Instructions

AT Commands 50 (84)
3.8.7 AT*AMECFL Read/Write Easy Configuration Modes Function List
Reads/Writes the list of supported Easy Configuration Modes
AT*AMECFL=
Sets the list of supported Easy Configuration Modes. For default value see AT*AMDEFAULT.
Syntax:
AT*AMECFL=<easy_config_modes>,<store>
Input Parameters:
Name
Type Description
easy_config_modes
String
Comma-separated string of up to 15 modes and their order to be
supported. Valid modes are 1 to 15. Using mode=0 (INVALID MODE)
will terminate the list at the given position.
store
Boolean If store is 1 the new value is stored permanently.
Example:
AT*AMECFL=1,2,3,4,5,6,1<br>OK
AT*AMECFL?
Get the list of supported Easy Configuration Modes.
Syntax:
AT*AMECFL?
Example:
Input: AT*AMECFL?
3.8.8 AT*AMTFTP TFTP Upgrade
AT*AMTFTP=
Trigger a firmware update via TFTP. Device will automatically be rebooted into bootloader mode.
Syntax:
AT*AMTFTP=<device_ip>,<server_ip>,<filename>
Input Parameters:
Name
Type Description
device_ip NetworkAddress The IP that the device shall use during the upgrade procedure
server_ip
NetworkAddress TFTP server IP address
filename
String
Firmware filename (.fwz)
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US