Instructions

AT Commands 45 (84)
3.6.15 AT*WSCLR Read the Connection list
AT*WSCLR=
Reads an entry in the Connection list.
Syntax:
AT*WSCLR=<index>
Input Parameters:
Name
Type Description
index
Integer
The index (0..49) of the entry to read.
Example:
AT*WSCLR=2<br>*WSCLR:<2>,<bssid>,<ssid><channel>
AT*WSCLR?
Reads the list of Connections (Access Points) that the unit can use.
Syntax:
AT*WSCLR?
Example:
AT*WSCLR?<br>returns *WSCLR:<index>,<bssid>,<ssid>,<channel> for
each entry in the list followed by OK.
3.6.16 AT*WSCLW Write an entry (AP) in the Connection list
AT*WSCLW=
Writes an entry in the Connection list. NOTE: If store is set to 1 all entries in the connection list
will be stored.
Syntax:
AT*WSCLW=<index>,<bssid>,<ssid>,<channel>,<store>
Input Parameters:
Name
Type Description
index
Integer
The index (0..49) of the AP to write.
bssid MACAddress The BSSID of the AP.
ssid
String
The SSID of the AP. Max 32 characters.
channel
Integer
The channel of the AP.
store
Boolean If store is 1 the new value is stored permanently.
Example:
AT*WSCLW=0,00026F668FA8,dutAP1,11,1<br>AT*WSCLW=
1,00026F668FA8,dutAP2,6,1
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US