Instructions

AT Commands 40 (84)
3.6.7 AT*WSAM Authentication Mode for Station
AT*WSAM=
Set the Station Authentication Mode. For default value see AT*AMDEFAULT.
Syntax:
AT*WSAM=<mode>,<store>
Input Parameters:
Name
Type Description
mode
Integer
Authentication Mode: 0 = Open, 1 = WEP64/128 (shared secret), 2 =
WPA/WPA2 PSK, 3 = LEAP, 4 = PEAP
store
Boolean If store is 1 the new value is stored permanently.
AT*WSAM?
Get the Station Authentication Mode.
Syntax:
AT*WSAM?
Example:
Input: AT*WSAM?
3.6.8 AT*WSRSS Read RSSI
AT*WSRSS?
Read RSSI value of the connection.
Syntax:
AT*WSRSS?
Example:
Input: AT*WSRSS? returns ERROR if there currently is no Station mode
connection.
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US