Instructions

AT Commands 28 (84)
3.4 WLAN Commands
3.4.1 AT*WMODE WLAN Mode
AT*WMODE=
Set WLAN mode, Station or AP.
Syntax:
AT*WMODE=<mode>
Input Parameters:
Name
Type Description
mode
Integer
The mode to set, Station (0) or AP (1).
Requires a reboot for the changes to take effect.
Example:
Input: AT*WMODE=1 sets WLAN mode to AP.
AT*WMODE?
Get WLAN mode, Station (0) or AP (1)
Syntax:
AT*WMODE?
Example:
AT*WMODE?<br>*WMODE:<mode>
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US