Instructions

AT Commands 13 (84)
3.3.8 AT*BFP Fixed PIN
AT*BFP=
Set the fixed pin/passkey used for BT authentication
Syntax:
AT*BFP=<pin>,<store>
Input Parameters:
Name
Type Description
pin String
The pin/passkey to set. A numerical value 0..999999.
store
Boolean If store is 1 the new value is stored permanently.
AT*BFP?
Get the fixed pin/passkey used for BT authentication.
Syntax:
AT*BFP?
3.3.9 AT*BPM Pairing Mode
AT*BPM=
Set the pairing mode for BT
Syntax:
AT*BPM=<pair_mode>,<store>
Input Parameters:
Name
Type Description
pair_mode
Integer
The mode to set. Pairing off = 1, Pairing on = 2.
Note: This also applies to Bluetooth LE.
store
Boolean If store is 1 the new value is stored permanently.
AT*BPM?
Get the pairing mode for BT. Pairing off = 1, Pairing on = 2.
Syntax:
AT*BPM?
Example:
Input: AT*BPM?
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US