Instructions

AT Commands 58 (84)
3.9.2 AT*BLESRD Get/Set the scan response data
AT*BLESRD=
Set the data to be responded by this device.
Syntax:
AT*BLESRD=<data>,<store>
Input Parameters:
Name
Type Description
data
String
The new data to be responded as a HEX string with max 31 bytes.
store
Boolean If store is 1 the new value is stored permanently.
Example:
AT*BLESRD=0102000305FF,1<br>OK
AT*BLESRD?
Get the data currently being responded by this device.
Syntax:
AT*BLESRD?
Example:
AT*BLESRD?<br>*BLESRD:<data><br>OK
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US