Instructions

AT Commands 31 (84)
3.4.5 AT*WMIMO WLAN MIMO
AT*WMIMO=
Configures which antennas should be enabled 1: Enable only primary antenna 2: Enable both
antennas NOTE: This value is ignored on devices with only one antenna.
Syntax:
AT*WMIMO=<mode>
Input Parameters:
Name
Type Description
mode
Integer
Configures which antennas should be enabled.
Requires a reboot for the changes to take effect.
Example:
Input: AT*WMIMO=2 enable WLAN MIMO.
AT*WMIMO?
Get WLAN MIMO, MIMO off (1) or MIMO on (2)
Syntax:
AT*WMIMO?
Example:
AT*WMIMO?<br>*WMIMO:<mode>
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US