Instructions

AT Commands 26 (84)
3.3.29 AT*BCLW Write an entry in the Connection list
AT*BCLW=
Writes an entry in the Connection list. NOTE: If store is set to 1 all entries in the connection list
will be stored.
Syntax:
AT*BCLW=<index>,<bd_addr>,<name>,<role>,<store>
Input Parameters:
Name
Type Description
index
Integer
The index of the entry to write.
bd_addr MACAddress If specified the MAC address of the remote Bluetooth device must
match this value.
name
String
If name is specified and S register 2017 is 1 the remote name must
match this value exactly. If S register 2017 is 0 this is a case sensitive
substring of the remote name to connect to, e.g. if specified to DUT it
will try to connect to DUT, DUTx, xDUT and xDUTx, but not to dut.
role
Integer
The role of the remote device:
100: PAN User role, PAN Profile
101: Network Access Point role, PAN Profile
103: PAN, This will first try to connect to PANU, and if it fails, connect
to NAP, All others:Reserved
store
Boolean If store is 1 the new value is stored permanently.
Example:
AT*BCLW=0,00026F668FA8,dut1,101,1<br>OK
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US