Data Sheet

Industrial networking made easy! www.anybus.com
Anybus® is a registered trademark of HMS Industrial Networks AB, Sweden, USA, Germany and other countries. Other marks and words belong to their respecve companies.
All other product or service names menoned in this document are trademarks of their respecve companies.
Part No: MMA434 Version 19 11/2018 - © HMS Industrial Networks - All rights reserved - HMS reserves the right to make modicaons without prior noce.
TECHNICAL
SPECIFICATIONS
Type of wired interface Ethernet
Order code AWB2000 AWB2001 AWB2030 AWB2031
Color Black White top and black base Black White top and black base
Connector
Included plug connector (2x9p; 3.5mm, Phoenix DFMC
1.5/9-ST-3.5, push-in spring connecon).
RJ45 Ethernet/PoE, 3 Pole screw connector for power
Range 100 meters
Antenna One built-in antenna. Dual-band 2,4GHz and 5GHz.
Operang temperature
Shadow black and white: -40 to +65 °C, Direct sunlight: Black -40 to +45 °C, White -40 to +65 °C
(Storage temperature: -40 to +85 °C)
Weight 81 g 84 g
Housing material
Top: Valox 357X(f1) PBT/PC. Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and
immersion in accordance with UL 746C.
Boom: Celanex: XFR 6840 GF15. PBT glass reinforced plasc.
IP protecon class IP67 and UL NEMA 4X for top (outside the host), IP21 for boom (inside the host).
Dimensions
Diameter: 68 mm. Height: 75 mm (95 mm including
connector). Outside height: 41 mm.
Diameter: 68 mm. Height: 75 mm without PS-connector,
84 mm incl. PS-connector. Outside height: 41 mm.
Mounng M50 screw and nut (50.5 mm hole needed).
Power
9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011
pulse 4). Reverse polarity protecon. (Consumpon: 0.7W
idle, 1.7W max.)
19-36 VDC, PoE (Power over Ethernet) DTE Type1
according to IEEE 802.3af. (Consumpon: 0.7W idle, 1.7W
max.)
Conguraon
Three dierent methods: • Accessing the built-in web pages in the product • Sending AT-commands via Telnet/Raw
TCP • Using Easy Cong modes
Vibraon compability:
Sinosodial vibraon test according to IEC 60068-2-6:2007 and with extra severies; Number of axes: 3 mutually
perpendicular (X:Y:Z), Duraon: 10 sweep cycles in each axes, Velocity: 1 oct/min, Mode: in operaon, Frequency: 5-500
Hz, Displacement ±3.5 mm, Acceleraon: 2g.
Shock test according to IEC 60068-2-27:2008 and with extra severies; Wave shape: half sine, Number of shocks: ±3 in
each axes, Mode: In operaon, Axes ± X,Y,Z, Acceleraon: 30 m/s
2
, Duraon: 11 ms.
Humidity compability: EN 600068-2-78: Damp heat, +40°C, 93% humidity for 4 days.
COMMUNICATION WITH HOST DEVICE
Digital input
Usage: To control roaming between access points. (max 3
m signal cable).
None
Ethernet
10/100BASE-T with automac MDI/MDIX auto cross-over detecon. Supported Ethernet protocols: IP, TCP, UDP, HTTP,
LLDP, ARP, DHCP Client/Server, DNS support. PROFINET IO, EtherNet/IP, Modbus-TCP. (SNMP user management and
access control in pending release.)
WIRELESS STANDARDS
Wireless LAN
Wireless standards: WLAN 802.11 a, b, g, n, d.
Operaon modes: Access point or Client
WiFi channels: 2.4 GHz, channel 1-11 + 12-13 depending on regulatory domain scan.
5 GHz Access Point: 36-48 (U-NII-1), 5 GHz Client: 100-116 + 132-140 and 120-128 depending on regulatory domain
scan. (U-NII-1, U-NII-2, U-NII-2e).
RF output power: 18 dBm EIRP (including antenna gain 3dBi)
Max number of slaves for access point: 7
Power consumpon: 54mA@24VDC
Net data throughput: 20 Mbps. Link speed: max 65 Mbps (802.11n SISO)
Security: WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP including MS-CHAP.
Classic Bluetooth
Wireless standards (proles): PANU & NAP
Operaon modes: Access point or Client
RF output power: 14 dBm EIRP (including antenna gain 3dBi)
Bluetooth conducted sensivity: -90 dBm
Max number of slaves for access point: 7
Power consumpon: 36 mA@24VDC
Net data throughput: ~1 Mbps
Bluetooth version support: Classic Bluetooth v2.1
Security: Authencaon & Authorizaon, Encrypon & Data Protecon,
Privacy & Condenality, NIST Compliant, FIPS Approved
Bluetooth Low Energy
Wireless standards (proles): GATT
Operaon modes: Central or Peripheral (pending)
RF output power: 10 dBm EIRP (including antenna gain 3dBi)
Max number of simultaneous Peripheral connecons: 7
Max number of Peripherals is virtually unlimited by mulplexing
Power consumpon: 36 mA@24VDC
Net data throughput: ~200 kbps
Bluetooth version support: Bluetooth 4.0 dual-mode
Security: AES-CCM cryptography
CERTIFICATIONS
Europe
ATEX Category 3, zone 2 according to EN60079-15, product
marking: EX II 3 G nA IIC T4 Gc. CE, 2014/53/EU Radio
Equipment Direcve (RED)
ATEX Category 3, zone 2 according to EN60079-15, product
marking: EX II 3 G nA IIC T4 Gc. CE, 2014/53/EU Radio
Equipment Direcve (RED)
U.S.
FCC 47 CFR part 15, subpart B. UL: Ind. Cont. Eq. also
Listed Ind. Cont. Eq. for Haz. Loc. CL1, DIV 2, GP A,B,C,D, T4.
UL le: E203225
FCC 47 CFR part 15, subpart B. UL: Ind. Cont. Eq. also
Listed Ind. Cont. Eq. for Haz. Loc. CL1, DIV 2, GP A,B,C,D, T4.
UL le: E203225
Canada ICES-003 ICES-003
Japan MIC MIC
Other countries Argenna, Australia, Brazil, Colombia, Turkey, Malaysia
Pending: Chile, India
Turkey
Mounng
The Anybus Wireless Bolt is mounted into a 50.5 mm
(M50) hole in the host device. The top (“helmet”) goes
on the outside and provides an IP67 exterior. The boom
is located inside the machine or cabinet (IP21).
Conguraon
You can congure the Anybus Wireless Bolt by
accessing the built-in web pages in the product. You can
also send AT commands or use Easy Cong modes.
Order a Starter Kit!
Bolt 18-pin: 2 x Wireless Bolts 18-pin (AWB2000), 2 x
Power Supply (world), cabling, Quick Start Guide. Order
code: AWB2300
Bolt RJ45: 2 x Wireless Bolts RJ45 (AWB2030), 2 x
Power Supply (world), power cables, Quick Start Guide.
Order code: AWB2330
Bolt Cable Kit
Bolt connector with Ethernet
cable (RJ45 male) and power
supply (World) with cable.
Both cables are 150cm.
Order code: 024703
(AWB2000 only)