Datasheet
Industrial networking made easy! www.anybus.com
Anybus® is a registered trademark of HMS Industrial Networks AB, Sweden, USA, Germany and other countries. Other marks and words belong to their respecve companies.
All other product or service names menoned in this document are trademarks of their respecve companies.
Part No: MMA434 Version 14 10/2017 - © HMS Industrial Networks - All rights reserved - HMS reserves the right to make modicaons without prior noce.
TECHNICAL SPECIFICATIONS
Type of wired interface Ethernet
Order code AWB2000
Range 100 meters
Antenna Built-in
Operang temperature -40 to +65 °C (Storage temperature: -40 to +85 °C)
Weight 81 g
Housing material
Top: Valox 357X(f1) PBT/PC. Suitable for outdoor use with respect to exposure to ultraviolet light, water
exposure and immersion in accordance with UL 476C.
Boom: Celanex: XFR 6840 GF15. PBT glass reinforced plasc.
IP protecon class IP67 and UL NEMA 4X for top (outside the host), IP21 for boom (inside the host).
Dimensions Diameter: 70 mm. Height: 70 mm (95 mm including connector). Outside height: 41 mm.
Mounng M50 screw and nut (50.5 mm hole needed).
Connector Included plug connector (2x9p; 3.5mm, Phoenix DFMC 1.5/9-ST-3.5, push-in spring connecon).
Power
9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011 pulse 4). Reverse polarity protecon. (Consumpon:
0.7W idle, 1.7W max.)
Conguraon
Three dierent methods:
• Accessing the built-in web pages in the product
• Sending AT-commands via Telnet/Raw TCP
• Using Easy Cong modes
Vibraon compability:
Sinosodial vibraon test according to IEC 60068-2-6:2007 and with extra severies; Number of axes: 3 mutually
perpendicular (X:Y:Z), Duraon: 10 sweep cycles in each axes, Velocity: 1 oct/min, Mode: in operaon, Frequency:
5-500 Hz, Displacement ±3.5 mm, Acceleraon: 2g.
Shock test according to IEC 60068-2-27:2008 and with extra severies; Wave shape: half sine, Number of shocks:
±3 in each axes, Mode: In operaon, Axes ± X,Y,Z, Acceleraon: 30 m/s
2
, Duraon: 11 ms.
Humidity compability: EN 600068-2-78: Damp heat, +40°C, 93% humidity for 4 days.
COMMUNICATION WITH HOST DEVICE
Digital input Usage: To control roaming between access points. (max 3 m signal cable).
Ethernet
10/100BASE-T with automac MDI/MDIX auto cross-over detecon. Supported Ethernet protocols: IP, TCP,
UDP, HTTP, LLDP, ARP, DHCP Client/Server, DNS support. PROFINET IO, EtherNet/IP, Modbus-TCP. (SNMP user
management and access control in pending release.)
WIRELESS STANDARDS
WLAN
Wireless standards: WLAN 802.11 a, b, g, n. (n in pending release)
Operaon modes: Access point or Client
WiFi channels: 2.4 GHz, channel 1-11.
5 GHz Access Point: 36-48 (U-NII-1), 5 GHz Client: 36-140 (U-NII-1, U-NII-2A, U-NII-2C).
RF output power: 16 dBm
WLAN conducted sensivity: 2.4 GHz: -95 dBm. 5 GHz: -90 dBm.
Max number of slaves for access point: 7
Power consumpon: 54mA@24VDC
Net data throughput: 20 Mbps. Link speed: 54 Mbps (802.11 g)
Security: WEP 64/128, WPA, WPA-PSK and WPA2, LEAP, PEAP (MS-CHAP pending).
Bluetooth
Wireless standards (proles): PANU & NAP
Operaon modes: Access point or Client
RF output power: 10 dBm
Bluetooth conducted sensivity: -90 dBm
Max number of slaves for access point: 7
Power consumpon: 36 mA@24VDC
Net data throughput: ~1 Mbps
Bluetooth version support: v4.0
Security: Authencaon & Authorizaon, Encrypon & Data Protecon, Privacy & Condenality, NIST
Compliant, FIPS Approved
Bluetooth Low Energy
(Pending release)
Wireless standards (proles): GATT
Operaon modes: Central or Peripheral
RF output power: 7 dBm
Max number of slaves for Central: 10
Power consumpon: 36 mA@24VDC
Net data throughput: ~200 kbps
Bluetooth version support: v4.0
Security: AES-CCM cryptography
CERTIFICATIONS
Europe
ATEX: ATEX Category 3, zone 2 according to EN60079-15, product marking: EX II 3 G nA IIC T4. 2014/53/EU Radio
Equipment Direcve (RED)
U.S.
FCC 47 CFR part 15, subpart B. UL OrdLoc: NRAQ-Programmable Controllers according to UL61010-2-201 and
NRAQ7-Process control equipment according to CSA61010-2-201, UL le E214107.
UL HazLoc: NRAQ-Programmable Controllers according to USL ANSI/ISA-12.12.01 (class 1 Div. 2) and CNL C22.2,
Nos. 213-M1987, UL le E203225.
Canada ICES-003
Japan MIC
Taiwan NCC (pending, pre-cered radio module)
South Korea (pending) KCC (pending, pre-cered radio module)
Mounng
The Anybus Wireless Bolt is mounted into a 50.5 mm
(M50) hole in the host device. The top (“helmet”) goes
on the outside and provides an IP67 exterior. The boom
is located inside the machine or cabinet (IP21).
Conguraon
You can congure the Anybus Wireless Bolt by
accessing the built-in web pages in the product. You can
also send AT commands or use Easy Cong modes.
Order a Starter Kit!
Includes: Two Wireless Bolts, Power Supply (world),
cabling, Quick Start Guide.
Order code: AWB2300
Bolt Cable Kit
Bolt connector with Ethernet
cable (RJ45 male) and power
supply (World) with cable.
Both cables are 150cm.
Order code: 024703
Bolt RJ45 Adapter
Bolt connector with
Ethernet cable (RJ45
female).
Total length 20 cm.
Order code: 024704


