Manual
Table Of Contents
- Anybus® Communicator™ - Modbus TCP Server to EtherCAT Slave
- Table of Contents
- 1. Preface
- 2. Safety
- 3. Preparation
- 4. About Anybus Communicator
- 5. Installation
- 6. Communicator Configuration
- 6.1. Connect the Communicator
- 6.2. Access the Built-In Web Interface From HMS IPconfig
- 6.3. Access the Built-In Web Interface From a Web Browser
- 6.4. Communicator Built-In Web Interface Overview
- 6.5. Modbus TCP Settings
- 6.6. EtherCAT Settings
- 6.7. I/O Configuration
- 6.8. Apply Configuration
- 6.9. Configuration Notes
- 7. PLC Configuration
- 8. Verify Operation
- 9. Maintenance
- 10. Troubleshooting
- 11. Technical Data
3.5. HMS Soware Applicaons
Download the soware installaon les and user documentaon from www.anybus.com/support.
IPcong
Use the HMS soware applicaon IPcong and scan your network to discover and change the Communicator IP
address and to access the Communicator built-in web interface.
NOTE
As an alternave, you can set a stac IP address within the same IP address range as the
Communicator IP address on the computer accessing the Communicator built-in web interface.
NOTE
IPcong is only available for Windows.
3.6. Third-Party Soware Applicaons
Microso Excel, or equivalent soware applicaon that supports the Oce Open XML Workbook (xlsx) le
format. Needed to open and read the Event log le.
HMS Soware Applicaons Anybus
®
Communicator
™
- Modbus TCP Server to EtherCAT Slave
SCM-1202-192 Version 1.0 Page 5 of 56