Manual
Table Of Contents
- Anybus® Communicator™ - Modbus TCP Server to EtherCAT Slave
- Table of Contents
- 1. Preface
- 2. Safety
- 3. Preparation
- 4. About Anybus Communicator
- 5. Installation
- 6. Communicator Configuration
- 6.1. Connect the Communicator
- 6.2. Access the Built-In Web Interface From HMS IPconfig
- 6.3. Access the Built-In Web Interface From a Web Browser
- 6.4. Communicator Built-In Web Interface Overview
- 6.5. Modbus TCP Settings
- 6.6. EtherCAT Settings
- 6.7. I/O Configuration
- 6.8. Apply Configuration
- 6.9. Configuration Notes
- 7. PLC Configuration
- 8. Verify Operation
- 9. Maintenance
- 10. Troubleshooting
- 11. Technical Data
11. Technical Data
For complete technical specicaons and regulatory compliance informaon, please visit www.anybus.com.
11.1. Technical Specicaons
Arcle idencaon ABC4016
Conguraon connector RJ45
Upper connector RJ45 x 2
Lower connector RJ45 x 2
Power connector 3-pin screw connector
Power supply 12-30 VDC, Reverse voltage protecon and short circuit protecon
Power consumpon Typical: 160 mA @ 24 V Max: 400 mA @ 12 V
Storage temperature -40 to +85 °C
Operang temperature -25 to +70 °C
Humidity EN 600068-2-78: Damp heat, +40°C, 93% humidity for 4 days
EN 60068-2-30: Damp heat, +25°C – +55°C, 95% RH, 2 cycles
Vibraon See datasheet
Housing material Plasc, See datasheet for details
Protecon class IP20
Product weight 150 g
Dimensions 27 x 144 x 98 mm (W x H x D) with connectors included
Mounng DIN-rail
Technical Data Anybus
®
Communicator
™
- Modbus TCP Server to EtherCAT Slave
SCM-1202-192 Version 1.0 Page 53 of 56