Manual
Table Of Contents
- Anybus® Communicator™ - Modbus TCP Server to EtherCAT Slave
- Table of Contents
- 1. Preface
- 2. Safety
- 3. Preparation
- 4. About Anybus Communicator
- 5. Installation
- 6. Communicator Configuration
- 6.1. Connect the Communicator
- 6.2. Access the Built-In Web Interface From HMS IPconfig
- 6.3. Access the Built-In Web Interface From a Web Browser
- 6.4. Communicator Built-In Web Interface Overview
- 6.5. Modbus TCP Settings
- 6.6. EtherCAT Settings
- 6.7. I/O Configuration
- 6.8. Apply Configuration
- 6.9. Configuration Notes
- 7. PLC Configuration
- 8. Verify Operation
- 9. Maintenance
- 10. Troubleshooting
- 11. Technical Data
10.1.2. Event Log
Figure 41. Event log page example
How To Analyze the Informaon
The log follows the FIFO principle, rst in and rst out. The oldest (rst) value is processed rst.
Time (d:hh:mm:ss.ms) The date and me when the event occurred.
Message A brief descripon of the event.
Severity The severity of the event occurred.
For descripon of the symbols, see Communicator Status Monitor.
Source 0 Communicator
1 EtherCAT
2 Modbus TCP
To clear the current log, click Clear log.
Diagnoscs Anybus
®
Communicator
™
- Modbus TCP Server to EtherCAT Slave
SCM-1202-192 Version 1.0 Page 47 of 56