Manual
Table Of Contents
- Anybus® Communicator™ - Modbus TCP Server to EtherCAT Slave
- Table of Contents
- 1. Preface
- 2. Safety
- 3. Preparation
- 4. About Anybus Communicator
- 5. Installation
- 6. Communicator Configuration
- 6.1. Connect the Communicator
- 6.2. Access the Built-In Web Interface From HMS IPconfig
- 6.3. Access the Built-In Web Interface From a Web Browser
- 6.4. Communicator Built-In Web Interface Overview
- 6.5. Modbus TCP Settings
- 6.6. EtherCAT Settings
- 6.7. I/O Configuration
- 6.8. Apply Configuration
- 6.9. Configuration Notes
- 7. PLC Configuration
- 8. Verify Operation
- 9. Maintenance
- 10. Troubleshooting
- 11. Technical Data
9.3. Firmware Management
9.3.1. View the Firmware Version
On the Support page, you can view the current applied rmware version.
Figure 38. Support page, Product informaon example
9.3.2. Firmware and Conguraon Compability
Compability aer rmware upgrade
Current conguraon is sll compable aer upgrading the rmware.
Compability aer rmware downgrade
9.3.3. Firmware File Validaon
Before the rmware le is imported into the system, the rmware upgrade funcon perform a validaon of the
le, to ensure that:
• the rmware is compable with the Communicator hardware
• the rmware is suited for the product
• the ocially HMS soware signatures are valid
• that the rmware le is not corrupt or damaged
If the rmware le does not pass the validaon, the rmware le is rejected and an error message appear.
Anybus
®
Communicator
™
- Modbus TCP Server to EtherCAT Slave Firmware Management
Page 44 of 56 SCM-1202-192 Version 1.0










