Manual

9.1.2. Import Conguraon
To easily congure mulple Communicator with the same sengs, you can import a conguraon le.
Before You Begin
The supported le format is .conf.
Procedure
Figure 36. Files & rmware page
Import conguraon le:
1. On the Files & rmware page, click Import.
2. In the Import conguraon window, click Select le (.conf).
3. In the Open dialog box, browse to and select the conguraon le and click Open.
4. In the Import conguraon window, click Import.
5. In the Communicator address sengs window:
• To import IP sengs from the selected conguraon le, click Imported sengs.
All conguraon sengs are imported.
• To connue using the current IP sengs, click Congured sengs.
All conguraon sengs except the IP sengs are imported.
6. The conguraon le is parsed.
• If the conguraon is compable, the sengs are imported.
• If any compability mismatches occurs, a message about the mismatch appears.
7. To apply the sengs, click Apply in the web-interface header, and follow the instrucons.
Anybus
®
Communicator
™
- Modbus TCP Server to EtherCAT Slave Conguraon File Handling
Page 42 of 56 SCM-1202-192 Version 1.0