Instructions

3. Preparaon
3.1. Cabling
Have the following cables available:
• Ethernet cable for conguraon
• PROFIBUS cable for connecng to the high level network
• Power cable
3.2. Tools
Have the following tools available:
• Flat-head screwdriver, size 5.5 mm
Needed when removing the Communicator from DIN-rail.
• Flat-head screwdriver, size 3 mm
Needed when connecng the cables to the 7-pin connector.
Anybus
®
Communicator
™
- PROFIBUS to Modbus
RTU/Serial
Preparaon
Page 4 of 28 SP2980 1.2