Instructions

5.2. Find the Communicator on Your PC
The Communicator default IP address is 192.168.0.10.
To be able to access the Communicator built-in web interface.
Opon 1| Set a stac IP address on the PC
On the PC accessing the Communicator built-in web interface, set
a stac IP address within the same IP address range as the
Communicator IP address.
To access the Communicator built-in web interface, ensure that
port Port 80 TCP is open in your PC Windows Firewall.
Note that when you change to a stac IP address on your PC,
internet access is lost.
Opon 2 | Change the IP address on the Communicator conguraon port
Use the soware applicaon HMS IPcong to nd and change the
IP address on the Communicator conguraon port, to one within
the same IP address range as the PC accessing the Communicator
built-in web interface.
To download the installaon les, please visit
www.anybus.com/support and enter the product arcle number
to search for the Communicator support web page. You nd the
product arcle number on the product cover.
Anybus
®
Communicator
™
- PROFIBUS to Modbus
RTU/Serial
Find the Communicator on Your PC
Page 24 of 28 SP2980 1.2