Instructions

4.8. DIN Rail Demount
Before You Begin
IMPORTANT
Be careful when removing the Communicator from the DIN-rail. If not
removed properly, the DIN rail locking mechanism and the product
cover can break.
Have a at-blade screwdriver, size 5.5 mm, available.
Procedure
Remove the Communicator from the DIN Rail:
1. Insert the screwdriver into the Communicator DIN rail locking mechanism.
2. To unlock the Communicator DIN rail locking mechanism, turn the screwdriver
clockwise.
Figure 11. Unlock the Communicator
DIN Rail Demount Anybus
®
Communicator
™
- PROFIBUS to Modbus
RTU/Serial
SP2980 1.2 Page 21 of 28