Instructions

4.6. Security Switch
NOTE
Aer compleng the conguraon of the Communicator, lock the
security switch to prevent unauthorized access to the Communicator
built-in web interface.
When the security switch is in its locked posion, the Communicator built-in web interface
can not be accessed and the Communicator can not be congured using the built-in web
interface. Network specic parameters, congured via the PLC is sll available.
To Lock and Unlock the Security Switch
Figure 8. Security switch in locked and unlocked posion
Use a pointed object, such as a ballpoint pen.
• To lock the security switch, push the toggle towards the Communicator front.
• To unlock the security switch, push the toggle towards the Communicator back.
Anybus
®
Communicator
™
- PROFIBUS to Modbus
RTU/Serial
Security Switch
Page 18 of 28 SP2980 1.2