Instructions

4.5. Connect to Power
CAUTION
Ensure that the power supply is turned o before connecng it to the
equipment.
IMPORTANT
Using the wrong type of power supply can damage the equipment.
Ensure that the power supply is connected properly and of the
recommended type.
IMPORTANT
Before you connect the Communicator to power, ensure that the
PROFIBUS address is set on the rotary switches. If the PROFIBUS
address is set when the Communicator is operang, you must power
cycle the Communicator for the new seng to take eect.
Anybus
®
Communicator
™
- PROFIBUS to Modbus
RTU/Serial
Connect to Power
Page 16 of 28 SP2980 1.2