Instructions

Example 2. To set the node address 7E hex = 126 dec
• The rear rotary switch A is not used, ensure that it is set to 0.
• Set the center rotary switch B to 7.
• Set the front rotary switch C to E.
The center rotary switch B 7 hex = 7 dec and the front rotary switch C E hex = 14 dec.
The node address expressed in decimal numbers is therefore 16 x 7 + 14 = 126.
Anybus
®
Communicator
™
- PROFIBUS to Modbus
RTU/Serial
Rotary Switch Sengs
Page 14 of 28 SP2980 1.2