Manual

Installation 12 (16)
3.2 Connectors and Indicators
Fig. 7 Connectors
3.2.1 Power Connector (X3)
Connecting power with reverse polarity or using the wrong type of power supply may
damage the equipment. Make sure that the power supply is connected correctly and of
the recommended type.
Pin Signal
1 +24 VDC
2
Power Ground
3.2.2 USB Connector (X4)
Pin
Signal
1 +5 V input
2
USBDM (USB communication)
3
USBDP (USB communication)
4
Signal ground
Housing
Cable shield
3.2.3 LED Indicators
LED
Indication Meaning
GW Status Green Communication running
Red
Communication error
Red, flashing Network interface error
Other LED indicators, connectors and configuration switches are described in the documentation
for each respective network interface.
Anybus
®
X-gateway
™
User Manual
HMSI-27-262 4.0 en-US