Instructions

CIP Object Implementation 115
Doc: HMSI-27-314, Rev. 3.10Anybus Communicator EtherNet/IP / Modbus-TCP User Manual
22.9 TCP/IP Interface Object, Class F5h
22.9.1 General Information
Object Description
This object groups TCP/IP-related settings.
See also...
• “Basic Network Configuration” on page 37
• “Fieldbus Settings” on page 64
Supported Services
Class services: Get Attribute All
Get Attribute Single
Instance services: Get Attribute All
Get Attribute Single
Set Attribute Single
22.9.2 Class Attributes
22.9.3 Instance Attributes
# Access Name Type Value Description
1 Get Revision UINT 0001h Revision 3
2 Get Max Instance UINT 0001h 1 is the highest instance number
3 Get No. of instances UINT 0001h 1 instance is implemented
# Access Name Type Value Comments
1 Get Status DWORD 00000001h Attribute #5 contains valid information.
2 Get Configuration
Capability
DWORD 00000014h Attribute #5 is settable
Capable of obtaining network configuration via
DHCP.
3 Get/Set Configuration
Control
DWORD -
Value:
Meaning:
0 Configuration from non-volatile memory
2 Configuration from
DHCP
4 Get Port Object Struct of:
Path Size UINT 0002h 2 words
Path Padded EPATH 20 F6 24 01h Path to Ethernet Class, Instance 1
5 Get/Set Interface Con-
figuration
Struct of:
IP Address UDINT - IP address
Subnet Mask UDINT - Subnet mask
Gateway
Address
UDINT - Gateway Address
Name Server 1 UDINT - Primary DNS
Name Server 2 UDINT - Secondary DNS
Domain Name STRING - Default domain name
6 Get/Set Host Name STRING - Host name