User manual

ManualsBrandsANYBUS ManualsRemote MaintenanceBus RJ-45 M-Bus/Modbus-TCP-RJ45 Gateway 80 M-Bus Slaves

Advanced Configuration 41 (46)

System Configuration File (chip.ini) (continued)

Parameter Description Valid range Default value

MBUS_SECMASKMEDIUM Predefined medium ID for secondary scan Exactly 2 characters, 0-9 each

or 0xFFFF

0xFF

MBUS_SECMASKSERIAL Mask for serial number of meters for secondary scan Exactly 8 characters, 0-9 or 0xF

each

0xFFFFFFFF

MBUS_SECMASKVERSION Predefined version number for secondary scan Exactly 2 characters, 0-9 each

or 0xFFFF

0xFF

MBUS_SELECTMASK Disables parts of secondary address for exact selection, wildcards are used instead

(set via bit mask):

+1 = Serial number, +2 = Manufacturer, +4 = Version, +8 = Medium

0 - 15, 0

MBUS_STOPBITS Stop bits for serial M-Bus communication 1, 2 1

MBUS_TIMEOUT Timeout for M-Bus (ms) 0 - 65535 2000

MBUS_WAKEUPENABLE Enables specific wake-up request 0, 1 0

METER_MAXALLVALUECOUNT Limits the total number of meter values (0 = no limit) 0 - 65535 0

METER_MAXDEVICECOUNT Limits the number of meters (0 = no limit) 0 - 65535 0

METER_MAXVALUECOUNT Limits the number of meter values per meter (0 = no limit) 0 - 65535 0

METER_STAT_CONFIG Path for meter configuration file Text (max. 40 characters) /app/Device_Handle.

cfg

METER_TIME Interval for meter read-out (seconds)

IMPORTANT: Short cycle times and/or many meters may cause very high amounts

of data being generated.

10 - 4294967295 900

MODBUS_ADDRESS Modbus primary address or unit identifier 0 - 255 0

MODBUS_CONNECTIONTIMEOUT Connection timeout (seconds) 0 - 65535 60

MODBUS_DEBUGOUT Enables the debug output of Modbus data 0, 1 0

MODBUS_DISCONNECTTIMEOUT Timout for disconnection of an idle connection (seconds) 1 - 1000 60

MODBUS_ENABLE Enables the Modbus slaves 0, 1 0

MODBUS_MAXCONNECTIONS Maximum count of simultaneous Modbus TCP connections 0 - 80 5

MODBUS_NWPORT Network port of the Modbus slave 0 - 65535 502

MODBUS_SWAP Swap byte order of Modbus data

0: MSB first

1: LSB first

0, 1 0

MODBUSMETER_

PROTOCOLVERSION

Protocol version of the Modbus meter data:

Bit 0 = 2 registers per value (float-only)

Bit 1 = Multislave

Bit 2 = Word-Swapping of 32-bit values

Bit 3 = Dummy-mode

0 - 16 0

MUC_CONFIG_VER Version of the configuration file 1, 2 2 (explicit)

M-Bus to Modbus-TCP Gateway User Manual SCM-1202-0096-EN 2.1