Instructions

Anybus M-Bus to Modbus-TCP Gateway User Manual Doc: HMSI-27-300, Rev: 1.10
Chapter 7
7. Advanced features
7.1 Software update
In order to provide new features to the Anybus M-Bus to Modbus-TCP Gateway, the operating system
and gateway software can be updated using CHIPtool (see 2.2
Network configuration).
The update consists of two steps. In the first step, the operating system (RTOS) on the controller is up-
dated. In the second step the firmware of the gateway is transferred. In most cases, updating the RTOS
is not necessary.
The current version numbers of RTOS and the gateway software can be found in the
Service tab of the
web interface. See 3.1.7
Service tab.
Software updates should only be carried out by trained personnel as there
is a risk of restricting functionality or damaging the gateway.
The integrity of the software files must be confirmed before updating.
Corrupted software files may restrict the functionality of the gateway.
A continuous power supply must be ensured during an update. A power
failure during a software update may damage the gateway.