Instructions

Acquiring and processing meter data 21
Anybus M-Bus to Modbus-TCP Gateway User Manual Doc: HMSI-27-300, Rev: 1.10
5.1.2 Adding meters manually
Meters that are connected to the M-Bus interface of the gateway but not found automatically during a
scan can be added manually from the
Meter tab, see 3.1.2 Meter tab. The configuration of the meter
must be known to be able to add it manually.
The fields in the
Add meter dialog correspond to the fields in the meter list. It is possible to configure
the interface to which the meter is connected, the serial number of the meter, the 3-letter manufacturer
code (see www.dlms.com
), the medium, the version number, and the desired update cycle . You can also
add a custom
User label for identification purposes. The fields are explained in 3.1.2 Meter tab.
The parameter
Number of meters makes it possible to create more than one meter at the same time
with the same configuration.
Click
OK to save the configuration. The new meter(s) will now appear in the list.