Instructions

Configuration 15
Anybus M-Bus to Modbus-TCP Gateway User Manual Doc: HMSI-27-300, Rev: 1.10
3.1.6 User tab
The User tab allows you to create and manage users and assign them specific access rights. The follow-
ing users are pre-configured on delivery:
Access rights to the different tabs of the web interface and to the FTP server can be set individually for
each user by ticking the check boxes. Most of the choices are self-explanatory.
Change password means that the user is allowed to change his/her password.
Sessions indicates the currently active sessions for this user.
Maximum sessions indicates the maximum number of simultaneous sessions allowed for the user,
where -1 means unlimited.
To edit the password and the max session setting, either double-click on a user entry or right-click on
the user entry and select
Edit. To change the password, tick the Set password checkbox, then enter
the new password in the
Password field.
User Password Description
admin admin Administrator user with root access, allows full access to all services
(HTTP, FTP, flash update, IP configuration).
web web Default user for the web interface. Allows full access to the web interface.
If a user with this name and password exists, the web server will automatically log in
with these credentials when accessed.
ftp ftp User for FTP access to the log directory (C:/log/)
The admin user can not be edited this way. To change the admin password, log
in as admin and click
Change password at the top of the web page.
If you lose the admin password the unit must be reset. Please contact
Anybus support for assistance.