Instructions

Configuration 8
Anybus M-Bus to Modbus-TCP Gateway User Manual Doc: HMSI-27-300, Rev: 1.10
3.1.1 General tab
The General tab shows an overview of the current gateway configuration..
Reload discards the changes made on the page and reloads the currently active settings.
Save saves the changes and reinitializes the gateway.
If the network configuration is changed, the gateway will be available under the new IP address after you
click
Save. All established network connections to the gateway will be terminated and logged in users
will be logged out automatically.
Field Description Write access
Gateway name Name of the gateway (displayed in CHIPtool) Yes
Serial number Serial number of the gateway No
DHCP Enable automatic network configuration Yes
IP address
a
a. If DHCP is checked, the network parameter fields will be disabled
IP address of gateway Yes
Subnet mask
a
Subnet mask of gateway Yes
Gateway address
a
IP address of your local network gateway (not to be confused with
the Anybus M-Bus to Modbus-TCP Gateway)
Yes
DNS IP
a
IP address of DNS server Yes
Free Memory Flash (kB) Free storage space on internal memory of the controller No
System date (local) Current local system date Yes
System time (local) Current local system time Yes
SNTP Server Address of time server Yes
Changing the network configuration may restrict accessibility. If the
network parameters have been correctly set by an administrator you
should not change them.
Date and time are processed internally as UTC time (without time zone shift).
The web browser will then convert the date and time according to the local time
zone of the computer.