Instructions

Installation 5
Anybus M-Bus to Modbus-TCP Gateway User Manual Doc: HMSI-27-300, Rev: 1.10
2.2.1 CHIPtool
1. Download and install CHIPtool, then start it using the link in the Windows Start Menu.
The first window will show a list of all detected devices in the local network.
2. Right-click on the gateway that you wish to configure, then select
IP configuration from the
context menu.
3. If your network has a DHCP server, check
Use DHCP for automatic configuration.
If your network does not have a DHCP server, change the
IP Address, Network mask and
Gateway settings manually to match your network.
4. Press
Config to save the IP configuration to the gateway.
If Use DHCP is checked but the gateway is not able to obtain an IP address dy-
namically, it will choose a random IP address in the range 169.254.xxx.xxx.