Datasheet

Anybus Wireless Bolt product

Features & Benefits

Key Use Cases

Base Protector and mounting kit for

Anybus Wireless Bolt

The Bolt Base Protector offers the Bolt an all-around IP66/67 protection. This is ideal for outdoor

usage or where the conditions are harsh and demanding.

The kit comes in two versions:

1. Base Protector only. This requires a flat surface with a 50,5 mm hole where the Bolt and Base

Protector can be mounted.

2. Base Protector including a stainless-steel mounting bracket kit for wall or pole mounting.

Offers all around IP66/67 protection for Anybus Wireless Bolt



Durable and robust materials for outdoor usage



Mounting Bracket kit offers wall or pole mounting option



Optimal mounting of Anybus Wireless Bolt for good radio signal



Wall or Pole mounting with the Mount Bracket kit



PAGE 1
Anybus Wireless Bolt product Base Protector and mounting kit for Anybus Wireless Bolt The Bolt Base Protector offers the Bolt an all-around IP66/67 protection. This is ideal for outdoor usage or where the conditions are harsh and demanding. The kit comes in two versions: 1. Base Protector only. This requires a flat surface with a 50,5 mm hole where the Bolt and Base Protector can be mounted. 2. Base Protector including a stainless-steel mounting bracket kit for wall or pole mounting.
PAGE 2
Bolt Base Protector with Mounting Bracket and slim clamps mounted on a pole Mounting bracket Bolt Base Protector with Mounting Bracket mounted on a wall. Technical Specifications Weight per Piece (excluding Base Protector: 90 g packing) Base Protector and Mount Bracket kit: 440 g Materials Base Protector: NCSS1002-B PBT Valox 357x-7001 (F1). Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 476C.
PAGE 3
Slim Clamps Slim clamps for a pole diameter of 50-165 mm Width: 9 mm Cable Gland Base Protector Cable Gland: M32, rubber seal with 2 cable holes for Ø 6 mm +- 0.1 mm, one cable rubber blind plug: Ø 6 mm, o-ring: M32x2,5 Screw Anchors For 8 mm drill hole. Length 40 mm Ordering information Order Code 024708 - Base Protector 024709 - Base Protector and Mounting Bracket kit Included components 024708: Base Protector, Ø 50mm O-ring, M32 Cable Gland with washer and rubber inserts, Installation Guide.