User's Manual

NaviCam
®
Stomach Capsule User Manual Page | 114
AnX Robotica Corp. UM-NCES-ST-01 Rev 1
CHAPTER 9: WARNINGS, CAUTIONS AND TROUBLESHOOTING
9.1 ESNavi Error Messages
Message
Solution
9.1.1.1.1. Check if
camera is
connected
firmly
Please connect the camera properly, exit the capsule control
program and restart it.
9.1.1.1.2. Equipment
initializati
on error
Check if power switch is turned on. If not, turn the power
switch on, exit the capsule control program and restart it.
9.1.1.1.3. Port
"COM7"
does not
exist
Check that 2D joystick is connected properly. After the
equipment is turned on, exit the capsule control program and
restart it.
9.1.1.1.4. Video
monitoring
connection
fails
Connect the camera properly, exit the capsule control program
and restart it.
9.1.1.1.5. Port
"COM8"
does not
exist
Check that 3D joystick is connected properly. After the
equipment is turned on, exit the capsule control program and
restart it.
9.1.1.1.6. Serial port
initializati
on error
Check that the three-axis equipment is connected properly.
After the equipment is turned on, exit the capsule control
program and restart it.
9.1.1.1.7. Port
"COM4"
does not
exist
Check that the Z-axis 24V board is connected properly. After
the equipment is turned on, exit the capsule control program
and restart it.
9.1.1.1.8. Cannot
connect to
Data
Recorder
Check if the Data Recorder is connected properly. Unplug and
then plug USB interface from the Data Recorder
9.1.1.1.9. Password
error
Log in again and reenter your password
Cannot delete
physician
information
Retry to delete current login physician information if not
succeed
Failed to add
physician
Retry inserting physician information if not succeed