Setup guide

Menu Commands
To navigate between On-Screen Menu (OSM) items, uICE uses the commands from Hardware Setup. The Menu
Commands page lets you assign commands to menu navigation actions like up, down, left and right. Only
the Menu/Back command is reserved to bring up the OSM, all other commands are still available for use
at Actions and only active if the OSM is visible.
The next topic shows how to customize the On-Screen Menu.
Menu Action Description Keyboard control
Menu/Back
Enters On-Screen Menu mode. If the On-Screen Menu is active,
goes one level up in the menu hierarchy or turns it off if the main
menu is displayed.
l
OSM not active:
Configured Hotkey
command from Hardware
Setup
l
OSM active: ESC,
Backspace or Hotkey
command
Enter/SelectSelects the currently highlighted item from the On-Screen Menu.Enter or Hotkey command
Up Moves the On-Screen Menu selection marker up.
Cursor Up or Hotkey
command
DownMoves the On-Screen Menu selection marker down.
Cursor Down or Hotkey
command
Left
Switches the currently selected On-Screen Menu item, for example
the way the sleep timer suspends your computer. In Filebrowser
mode, performs a page up.
Cursor Left or Hotkey
command
Right
Switches the currently selected On-Screen Menu item, for example
the way the sleep timer suspends your computer. In Filebrowser
mode, performs a page down.
Cursor Right or Hotkey
command
1..0
Used to enter digits in the On-Screen Menu's Sleep and Wake up
timers.
1..0