Instruction manual

TYPHOON WIRELESS OFFICE DESKTOP SL DESIGN
Article number: 40700
All specifications and information are subject to changes without further notice 9
Changing the channel and security ID
The mouse and keyboard can be setup to work with 2 different Radio frequency channels (optional)
and multiple security IDs. In this way you can have several wireless desktops installed in the same
room without interference to each other. To change the channel and/or security ID follow the steps
below:
1. Press the Connect button at the bottom of the keyboard.
2. Press the Connect button on the receiver.
3. Press the Connect button at the bottom of the mouse.
Note:
1. The Connect LED will be lighted up when the connection is established.
2. You will have to follow the same connection procedure whenever you replace the batteries.