Operating instructions

DELUXE FOOD WARMER

P/N 1010678 Rev. G 08/08

INSTALLATION (continued)

WARNING

Be sure to follow all warnings, precautions,

and procedures listed in the Important Safety

Information section of this manual before pro-

ceeding.

Figure 3. Filling Water Tank DFW/DFWT-100/150

Plumbing

NOTE: DFW models are designed to use cold tap

water. Distilled water may be used to reduce cal-

cium/mineral deposit build-up and reduce mainte-

nance costs.

Tank Cover

CAUTION

All electrical connections must be in accordance

with local electrical codes and any other appli-

cable codes.

MODELS DFW/DFWT-100/150

The DFW/DFWT-100/150 models have a self-contained

water tank. To fill the self-contained water tank:

1. Open the Tank Cover on top of the unit (Figure 3).

NOTE: Make sure filter inside tank is installed

properly.

2. Pour in cold tap water. The tank will hold approxi-

mately 3 quarts (2.81 liters). Do NOT overfill the

tank.

3. Close the Tank Cover.

CAUTION

This equipment is to be installed to comply with

the basic plumbing code of the Building Officials

and Code Administrators, Inc. (BOCA) and the

Food Service Sanitation Manual of the Food and

Drug Administration (FDA).