Operating instructions

DELUXE FOOD WARMER
13
P/N 1010678 Rev. G 08/08
OPERATION (continued)
7. Press and release the PROGRAM button again
and use the UP or DOWN ARROW buttons to
change the SHO setting in minutes (Item F,
Figure 7).
NOTE: 00 minutes is recommended.
8. Press and release the PROGRAM button again
and “H2O” is displayed (Item G, Figure 7).
9. To change the H2O setting, press and release
the PROGRAM button again to display the set-
ting (Item H, Figure 7). Use the UP or DOWN
ARROW buttons to increase or decrease the time.
NOTE: Recommended settings are :
•DFW/DFWT/DFWF-250[0_50]
•DFW/DFWT-150[0_08]
10. Press either the START/STOP or OPERATE
button to store the changes and to exit the
Program mode.
NOTE: The START/STOP or OPERATE button may
be pressed at any time during programming to
store the changes and exit the Program mode.
NOTE: If no change is made within 5 seconds at
any time during the programming process, all
changes made up to that point are stored in memo-
ry and the control reverts to the Operation mode.
READY
UP DOWN PROGRAM START/STOP
POWER
1500
Figure 7. Control Programming Sequence
READY
UP DOWN PROGRAM START/STOP
POWER
15
READY
UP DOWN PROGRAM START/STOP
POWER
00
READY
UP DOWN PROGRAM START/STOP
POWER
SHO
READY
UP DOWN PROGRAM START/STOP
POWER
00
READY
UP DOWN PROGRAM START/STOP
POWER
20
READY
UP DOWN PROGRAM START/STOP
POWER
H2O
READY
UP DOWN PROGRAM START/STOP
POWER
0_80
A. Total Cycle Time
B. Total Cycle Minutes
C. Total Cycle Seconds
D. SHO Cycle
E. SHO Time in Seconds
F. SHO Time in Minutes
G. H
2
O Cycle
H. H
2
O Setting