Specifications

STS-200 STEAMER/SCALE
8
P/N 1010929 Rev. B 03/12
A.J. Antunes & Co.
OPERATION (continued)
Rotary Switch Settings
At the back of the STS-200 unit are three Rotary
Switches: Temp, Cycle, and Shot.
Setting Temp. Cycle/sec Shot/Sec
0 375°F* 10.0 1.0
9 370°F 9.0 0.9
8 365°F 8.0 0.8
7 360°F 7.0 0.7
6 355°F 6.0 0.6
5 350°F 5.0 0.5
4 345°F 4.0* 0.4*
3 340°F 3.0 0.3
2 355°F 2.0 0.2
1 330°F 1.0 0.1
* These are the Standard Settings for the STS-200.
HTRSOL
7
3
6
5
4
8
2
9
1
0
7
3
6
5
4
8
2
9
1
0
7
3
6
5
4
8
2
9
1
0
CYCLETEMP SHOT
The Temp Rotary Switch sets the operating temperature
of the unit. The Cycle Rotary Switch sets the length of
a steam cycle in seconds. The Shot Rotary Switch sets
the amount of water used in each cycle of operation.
The standard settings and other possible settings are
listed in the following table.