Specifications

CCC-20 TECHNICAL MANUAL
LAST UPDATE 5-1-05
1060005 5/05
TESTING SPLASH GUARD
See Splash Guard under “Component Description & Function” before proceeding.
The splash guard is typically trouble free. If it is damaged or
missing, it must be replaced.
Replacement Procedures
Remove service panel.
Disconnect power switch wires (Mark for reinstallation).
Squeeze locking tabs inward & push switch away from unit.
Reinstall switch & new splash guard. NOTE: If splash guard is
damaged or missing, it must be replaced. Failure to do so may result
in water/moisture damage to electrical components.
Reinstall wiring onto switch.
Test unit for proper operation.