Specifications

MS TECHNICAL MANUAL
LAST UPDATE 12-10-04
1060003 12/04
TESTING SQUARED MOMENTARY SWITCH
See Momentary Switch under “Component Description & Function” before proceeding.
TESTING SQUARED MOMENTARY SWITCH
Disconnect wires to isolate switch.
Press & hold switch in. Verify continuity across both terminals.
Next, release switch. Reading should now be infinity.
Replace if fails test.
Replacement Procedures
Disconnect switch wires.
Squeeze locking tabs inward & push switch out towards front of unit.
Snap new switch into place until flush.
Reinstall wiring onto switch.
Test unit for proper operation.