Specifications

MS TECHNICAL MANUAL
LAST UPDATE 12-10-04
1060003 12/04
Pinhole leak in rubber hoses
(MS-150/155/355).
Replace hoses.
Loose or damaged water line
tubes and/or fittings inside
electrical hous-ing.
Apply teflon tape, Tighten or
replace tubes and/or fit-tings.
“ERR” appears in the Control
Display.
Programming and/or SHO and
H2O values were
adjusted/changed improperly.
Reset the Control Board as
described in the Programing
section of this manual.
Water leaking inside electrical
hous-ing.
TROUBLE SHOOTING
Problem Possible Cause Corrective Action