Specifications

MS TECHNICAL MANUAL
LAST UPDATE 12-10-04
1060003 12/04
MS Component Description & Function
Audio Signal: An audio device located at the bottom of the control board. At the completion of steam cycle,
the control board supplies approximately 10-15 VDC to it for 3 seconds.
NOTE: The signal can be replaced separately if it fails. It can be tested with a 9 VDC battery.
Green “Ready” light: It is located at the front of the unit and attached to the control board. When the
green light blinks, it indicates the generator is not up to temperature, therefore, the unit should not be cycled
during this time. When the green light is steadily on, it indicates the generator is up to operating temperature &
ready for use. When the light is off, it indicates the unit is in a steam cycle.