User manual

DESCRIPTION DES PARAMETRES
10
Setting the LCN number
Use the buttons  and  (while keeping SELECT button pressed) to change the
LCN number of the program.
11
Setting the channel name.
Use the buttons  and  (while keeping SELECT button pressed) to select
a character. Then release the SELECT button to set the following character.
Some characters have a special function, namely :
forward space
backspace
 delete whole line
<L.C.N.>
< CHANNL >
12
To leave this menu. Press the SELECT button to leave this menu.
<RETURN>
< TS. ID>
1
Setting the Transport Stream ID
Use the buttons  and  (while keeping SELECT button pressed) to change the
number of the transport stream ID.
<PRG. ID>
2
Setting the program ID (Service ID)
Use the buttons  and  (while keeping SELECT button pressed) to change the
number of the program ID.
< NET ID >
4
Setting the Network ID.
Use the buttons  and  (while keeping SELECT button pressed) to change the
number of the network ID.
5
Use the buttons  and  (while keeping SELECT button pressed) to select
a character. Then release the SELECT button to set the following character.
Some characters have a special function, namely :
forward space
backspace
 delete whole line
<NETWRK>
4.3 - The menu EXTRA :
< ONETID >
3
Setting the Original Network ID.
Use the buttons  and  (while keeping SELECT button pressed) to change the
number of the original network ID.