User manual

4 - Programming mode
To access the menus press and keep pressed the SELECT button. Use the buttons 
and to choose between menus INPUT / OUTPUT / EXTRA and MISC. When you
have reached the menu of your choice, release the SELECT button.
Now you have access to the different parameters of the selected menu and inspect
and change their values if necessary.
Use the buttions  and  to go from one parameter to the other. Once you have
reached the wanted parameter, press and keep pressed the SELECT button : the
value of the parameter is now displayed. To modify this value, use the  and  but-
tons while keeping the SELECT button pressed. Once the parameter changed you can
release the SELECT button.
<STDARD>
1
Setting the input standard
Use the buttons  and  (while keeping SELECT button pressed) to change
this option in PAL or NTSC.
<FORMAT>
2
Setting the picture format
Use the buttons  and  (while keeping SELECT button pressed) to change the
picture format between 4/3 - 16/9 or AUTO (automatic).
< LIGHT >
3
Setting the luminosity
Use the buttons  and  (while keeping SELECT button pressed) to adjust the
luminosity. (0-255).
4
Setting the contrast
Use the buttons  and  (while keeping SELECT button pressed) to adjust the
contrast.(0-255).
5
Setting the saturation
Use the buttons  and  (while keeping SELECT button pressed) to adjust the
saturation.(0-255).
<CONTR. >
< SAT. >
6
To leave this menu. Press the SELECT button to leave this menu.
<RETURN>
4.1 - The INPUT menu :