User manual

1. - Safety considerations

1.1 CONNECTING TO THE MAINS SUPPLY

This product has to be connected to the mains supply. If there is the slightest doubt concerning the

type of connection available on the installation, please contact your supplier of electricity. Before car-

rying out maintenance operation or modiﬁ cation of the installation, the modulator has to be discon-

nected. Remark : only use the supplied power adaptor.

1.2 OVERVOLTAGE

An overvoltage on hte mains supply,can cause shortcircuits are ﬁ re. Never overload the power lines.

1.3 LIQUIDS

This module should be protected from splashes. Please assure yourself that no containers containing

liquids is placed on this module. Also be aware of other persons splashing liquids on the module.

1.4 CLEANING

Disconnect the module before cleaning. Using only a humid cloth without solvant.

solvant.

1.5 VENTILATION

In order to assure an adequate air circulation and to prevent overheating, the ventilation holes should

not be obstructed. The module may not be installed in a hermetically sealed environment. Other elec-

tronic products or heat producing items may not be placed upon or near the module.

1.6 ACCESSORIES

The use of accessories not manufactured by the manufacturer can cause damage to the module.

1.7 INSTALLATION OF THE MODULE

The module must be installed in a place well protected from direct sunlight. All measures have to be

taken to avoid installation in humid or sunny places.Do not install near heating elements or other de-

vices producing heat. Assure yourself that the module is placed at least 10 cm form other equipment

with is susceptible to electromagnetic radiation. Do not install the module on instable items. A fall cans

cause physical or material damage.