User manual

5 - Programming using a PC
The settings of the TM250 can also be changed using a PC.
First, please install the software TMIFace on your PC. You can download this software
from our internet site anttron.com
After installation of this software, connect the TM250 using a USB cable (not included)
to your personal computer. Then launch the program TMIface.
On the display of the TM250 the message <USB> appears, indicating that the pro-
gramming is now performed through your PC. The following window appears on your
screen.
Now, all parameters discussed in Chapter 3 of this user manual can be modifi ed by
TMIface.