Use and Care Manual

2
The Smartpass Amplifier must be powered in order to function.
Push the smart switch On or Off and select the switching
with which more channels are received.
Switch Off - The LED indicates yellow for normal reception.
Switch On - The LED indicates green for stronger reception.
Scan channels after each switching in the Smartpass Amplifier
!
2/ Setting and Scanning
In the TV’s setup menu, set the mode to “Antenna” or “Air”, then, set TV to “Scan” for channels.
Consult the TV manual for detailed instructions. Extend the rods and rotate them until get the
best picture.
LED Indicator
ON/OFF
CHANNEL SCAN
scanning for channels
2
Rods
360°