SDS

Antop Antenna, Inc. – MSDS REPORT NO: ANTOP20190730 AT-120
MATERIAL SAFETY DATA SHEET
Version 2.0
Photo(s) of Product
Section 16 - Other Information
Disclaimer:
Antop Antenna makes no warranties as to the accuracy or completeness of this information and disclaims any liability
in connection with its use. Antop Antenna’s obligation shall be only as listed in Antop Antenna’s standard terms and
conditions of sale for this product. In no case will Antop Antenna be liable for any incidental, indirect or consequential
damages arising out of the sale, resale, use or misuse of the product.
The information listed here was prepared at Antop Antenna by qualified technical personnel, and to our knowledge it
is true and accurate. The information and recommendations are furnished for this product with the understanding that
the purchaser/user will independently determine the suitability of the product for their purpose. The data do not
constitute a warranty, expressed or implied, statutory or otherwise, nor are they a representation by Antop Antenna
for which there is an assumption of legal responsibility. The data is submitted for the user’s information and
consideration only. Any use of this product must be determined by the user to be in accordance with the applicable
federal, State/Provincial, and local laws and regulations and the user’s needs.
Users are advised that they may have additional disclosure obligations under other national and local laws. Users are
advised to ensure that this information is brought to the attention of all employees, agents, and contractors handling
this product. Users of Antop Antenna products should make their own evaluation to determine the suitability of each
such product for the specific application and to establish safe handling and installation procedures. Distributors of this
product are advised to forward this document, or the information contained herein, to every purchaser of this product.
The above information is based on the data of which we are aware and is believed to be correct as of the date of this
report’s preparation. Since the information in this report may not reflect the actual conditions that the product will be
used, under unforeseen conditions and that updated information may become available subsequent to the release of
this report, we cannot assume responsibility for the use of this product for any specific purpose other than that with
which it is originally intended. It is the responsibility of all users to make their own determination of the suitability of
this product for any particular purpose.