User Manual

To assemble

Attaching the barrel to the

action:

1. Grasp the butt stock at the grip

and with your thumb push the top

lever to the right until it locks (see

figure 1)

2. Grasp the barrel assembly and

align it parallel to the action with

the muzzle end pointed downward

at an approximate 45-degree

angle.

3. Insert the barrel monoblock

into the action so that the circular

pivot pin recesses engage the cir-

cular pivot pins at the front of the

action (see figure 2)

4. When the pin recesses are

snugly engaged in the action pivot

pins, rotate the barrel upwards

until the action is completely

closed and the top lever snaps back

to its closed position (see figure 3).

Attaching the fore-end

Hold the shotgun at the grip, take the fore-end and slide its rear, semi-

circular end into and against the matching curve section of the action (see

figure 4)

4 5