User Manual

C.I.P. specifications can cause serious personal injury and damage your

firearm.

CAUTION:

For your safety, the safety of others and to avoid damage to the gun,

beware of barrel obstructions. An obstruction such as mud, snow, dirt or

any other foreign object, can increase pressure and cause damage to your

gun and cause injury to you and to others. Before checking the barrel for

an obstruction, make sure the safety mechanism is “ON”. Open the

action and make sure that the firearm is unloaded. After assuring your

self that the firearm is completely empty, look through the chambers (do

not look down the muzzle). If an obstruction is detected, no matter how

small it may be, clean the barrels as described in the “Cleaning and lubri

cation” section of this manual on page 36.

ASSEMBLY AND DISASSEMBLY

WARNING

Be sure to wear eye protection

prior to performing any

assembly or disassembly.

Before assembling, be sure to

clean all parts of any visible debris

or dirt. After wiping the mecha-

nism clean, place a thin film of

high-quality gun grease on the fol-

lowing surfaces (see figures 1A,

1B & 1C).

1A) fore-end iron and fore-end

wood.

1B) view of barrel monoblock area

with ejectors.

1C) top view of action, monoblock

seat area, cocking lever, hinge pin

and locking bolt.