User Manual
5
WARNING! The fitting of non-approved
parts or accessories, or the carrying out of
non-approved alterations or servicing can be
dangerous and could aect the safety of the
product. It may also invalidate the terms and
conditions of the product warranty.
CAUTION! Keep batteries cool or at room
temperatures whenever possible. Sustained
elevated temperatures are the primary reason
for premature failure of Lithium-Ion batteries.
CAUTION! Charge batteries at room
temperature. In warm climates keep
chargers in air conditioned rooms for best
performance.
CAUTION! Although Lithium-ion has good
selfdischarge characteristics, batteries
should be stored for long term storage in a
fully charged condition.
CAUTION! Batteries should always be stored
in a fully charged state and kept cool. If
batteries must be stored for a long period
(over 30 days), the battery electronics will
enter a “deep sleep” mode. The battery will
“wake up” when placed on a charger. It is
always a good idea to submit the battery to a
discharge/charge cycle from time to time
during storage.
WARNING! RISK OF ELECTRICAL SHOCK:
Never attempt to service this battery. Refer
servicing to qualified service personnel.
WARNING! Never attempt to open this
battery. The electronic circuits inside the
battery can be damaged causing malfunction
and/or potential hazard to person and
property.
WARNING! Never attempt to replace the
cells in this battery – it cannot be rebuilt
or refurbished. At the end of its useful life
contact the Anton/Bauer Customer Support
Group
WARNING! Never attempt to replace the
cells in this battery – it cannot be rebuilt
or refurbished. At the end of its useful life
contact the Anton/Bauer Customer Support
Group
Weekly, or as needed - Clean the device,
associated components, and accessories
as needed with a damp, non-saturated
cloth or paper towel. Do not wet the
exposed metal part of the battery charge
terminals. Do not use solvents or scouring
agents. Example s of approved solvents
are Cidex® and Windex®. Consult Anton/
Bauer Customer Support Group for
approved list of cleaning agents.
Periodic cleaning of both the charger
terminals and battery terminals will
ensure continued reliable operation.
Clean the terminals occasionally with a
pencil eraser or lightly scrape the surface
with a blunt instrument to help reduce
the likely hood of build up causing poor
communication or charging.
Contact Anton/Bauer Customer Support
Group with additional inquires as to
maintenance.
Maintenance Storage
Safety