Wall Lamp Model No.
Safety Rules WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF. TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK. NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions or situations that may occur. It must be understood that common sense, caution, and care, are factors which cannot be built into any product.
Fixture Installation ⑦ ③ ⑥ ② ⑩ ① ④ ⑧ ⑨ ⑤ ⑪ NOTE: Please test the fixture before installation to ensure it's working properly. 1. Turn off power at circuit box to avoid possible electric shock. 2. Take off machine screw ③ from outlet box ①, attach the round bracket ② to outlet box ① with machine screw ③. 3.
Trouble Shooting 1. Missing/Broken Parts · Make a list of the missing/broken parts according to the packing list, take photos for broken parts, then email us for free replacements. 2. Bulbs Do Not Light Up · Check your power and switch to make sure it's power on. · Check the bulb to make sure it's installed correctly. · Change a new bulb. · Check the wires to make sure they are connected correctly. 3. Bulbs Flicker/Noisy Operation · Check the bulb to make sure it's installed correctly. · Change a new bulb.